210 litre pots of cast iron construction pictured above or 500 litre pots, fabricated from stainless or mild steel
FLOAT SWITCH HOUSING
When the float switch is activated, the compressor starts and its position in the housing allows for it to be cleaned by the mixture of air and water that flows past it at each cycle of operation. (when using liquid ring compressors)
THE COMPRESSORS AND MOTORS
The preferred compressor used is a liquid ring type with bronze or stainless steel wet end components. These will vary in size depending on the discharge head pressure required.
Some compressors used are close coupled with two or four pole, three phase electric motors and will vary in size with each application.
The valve box is of cast iron construction and is fitted with two specially designed cast and machined bronze non return valves. These are inlet and outlet non return valves which are also referred to as the clapper valves.
The control panel is individually designed to suit each specific application with the use of 24 volt control circuits for added safety. BMS, number of starts, LED lights, various alarm points and timer controls are standard features. Also, the control panel can be made to specific requirements.